![]() ![]() Most of the steps in this tutorial can be done using either the command line virsh tool or using the virt-manager GUI. As an SR-IOV VF network adapter using a KVM virtual network pool of adapters.As an SR-IOV VF network adapter using macvtap.This tutorial evaluates three of those ways: There are several different ways to inject an SR-IOV network VF into a Linux KVM VM. The Intel® Ethernet Controller 10 Gigabit 82599EB, which supports 32 VFs per port.The Intel® Ethernet Controller X540-AT2, which supports 32 VFs per port.The Intel Ethernet Server Adapter XL710, which supports up to 64 VFs per port. ![]() The Intel® Ethernet Server Adapter X710, which supports up to 32 VFs per port.Supported Intel Network Interface CardsĪ complete list of Intel Ethernet Server Adapters and Intel® Ethernet Controllers that support SR-IOV is available online, but in this tutorial, I evaluated just four: In the case of network VFs, SR-IOV improves north-south network performance (that is, traffic with endpoints outside the host machine) by allowing traffic to bypass the host machine’s network stack. SR-IOV provides the ability to partition a single physical PCI resource into virtual PCI functions which can then be injected into a VM. The KVM XML virtual machine definition file for the test VM.A script that lists virtual functions and their PCI and parent physical functions, and.A script that groups virtual functions by their physical functions,.There are a few downloads associated with this tutorial that you can get from intel/SDN-NFV-Hands-on-Samples: And finally, if you are using a 40 Gbps Intel® Ethernet Server Adapter XL710, consider using the Data Plane Development Kit (DPDK) in the guest otherwise you won’t be able to take full advantage of the 40 Gbps connection. If you must use the macvtap method, use virtio as your device model because every other option will give you horrible performance. It has the same performance as the VF PCI* passthrough method, but it’s much easier to set up. Here’s the short story: use the KVM virtual network pool of SR-IOV adapters method. This tutorial demonstrates several different ways of using single root input/output virtualization (SR-IOV) network virtual functions (VFs) in Linux* KVM virtual machines (VMs) and discusses the pros and cons of each method. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |